Guide to Specifications for THK Construction
The specifications may be subject to change.
Final specifications are provided with a firm quotation.
|Posts: || |
125 - 150 CCA treated Gum Pole.
Note - Post height is calculated to range from 0.5m to maximum of
1.5m above ground level.
|Bearers: ||As per SABS Code 082 - Safety |
|Joists: ||As per SABS Code 082 - Safety |
|Stairs: ||6 Tread Stair cases are allowed for with rails to both sides. |
|Floor: ||22mm x 102mm tongue and groove pine flooring for inside the house. |
|Note: || |
Flooring will be lightly sanded and sealed with an approved floor sealant,
if internal linings are taken.
Alternatively, the purchaser must complete the floor.
Please note that due to the nature of timber there can be various degrees
of contraction and expansion of joints which vary from climate to climate
and from place to place.
This can result in "gaps" forming between joints. To avoid this, various
additional options are available and can be quoted on request.
(These options include a ply-board sub-floor)
|Decking: || |
22mm thick CCA treated pine decking for veranda area.
Silkwood Penetrating Oil is supplied for two coats.
Wall Panels - Conforming to SABS Code 082
|External Wall Panels: || |
38/114 CCA treated pine frames 2.4m in height with 22mm CCA
treated log profile cladding to the outside of the frame.No internal
cladding to the frame.
Panels supplied unpainted with Penetrating Oil provided for two
coats to the outside once the building is erected.
|Vapor membrane: ||Enviro Tuff Sisalation fitted between cladding and frame. |
|Bracing: ||19/76 CCA Treated bracing included. |
|Internal Wall Frames: ||38/114 CCA treated pine frames with bracing. |
No internal lining included for these panels.
|Nogging: ||Both external and internal frames have one rows of noggings. |
|Doors and Windows: || |
Meranti Full Pane or Aluminium.
Frame timber (eg. Lintels and Sills) is included where doors and
windows are to be located
NB - Burglar bars and security doors are excluded.
|Structure: ||Louvre hip to Louvre hip = 26 degree pitch. |
|Roof Covering: || |
Colorbond - The purchaser may choose the colour.
|Roof Trimming: ||Nu Tec Fascia and Barge Boards. |
|Fasteners: ||Hurricane clips, nails, threaded rod and screws included. |
|Timber: || |
Loose 22mm CCA treated decking is supplied to cover corners and
joints between the panels.
38/114 and 38/152 timber included to support the roof over
veranda as required.
|Log Cladding: || |
Loose log cladding is supplied to cover the floor joists around the
bottom of the panels.
Log board and 38/76 CCA treated timber is included to beam fill
above the wall panels.
|Treatment: ||Penetrating oil for two coats on the outside of the house. |
|Ceiling: ||Rhino Ceiling 9mm painted white. |
Finished off against the wall with Rhino Cornices.
|Wall Linings: ||Dry Wall 12mm skim jointed and painted one colour throughout. |
|Skirting: ||Meranti/Pine |
|Meranti Stained or Pine Painted. |